- The Passing Score Question: What Is and Isn't Verified
- What the Verified Record Does Tell You
- Why the Two Course Headings Matter More Than a Number
- Written Exam, Signaling Practical, and Rigging Scenarios
- How to Confirm the Official Score and Other Numbers
- Preparing When the Cut Score Is Unknown
- A Sequencing Plan Built Around CE020 and CE021
- Avoiding Look-Alike Credentials and Borrowed Numbers
- Frequently Asked Questions
- No official CSPR-2 passing score was verified for this article, so any specific percentage you see quoted deserves skepticism.
- CE020 (eight-hour online) is the prerequisite for CE021 (20-hour classroom, developed with the Crosby Group).
- NEIEP permits a CE020 completion certificate to support exam registration and strongly recommends taking both courses.
- Course hours are instructional time, not exam timers, and finishing a course does not award CSPR-2.
The Passing Score Question: What Is and Isn't Verified
If you searched for a single number, here is the honest answer up front: no official passing score for the Certified Signal Person and Rigger Level 2 (CSPR-2) exam was verified in the sources checked for this article. No candidate handbook with a scoring section was retrieved, and no formal Level 2 exam blueprint was located. That means the cut score, the number of questions, the written-exam time limit, and the practical-assessment timers all remain unconfirmed.
That may feel unsatisfying, but it is more useful than a confident-sounding figure that turns out to belong to a different credential. Several unrelated certifications share the CSPR-2 abbreviation, and recycled numbers from those programs circulate widely. This article is about one credential only: Certified Signal Person and Rigger Level 2, administered through the National Elevator Industry Educational Program (NEIEP).
What the Verified Record Does Tell You
Although the cut score is unverified, several other facts are on firmer ground. Here is what the issuer's own pages and corroborating directories establish:
| Item | Status | Detail |
|---|---|---|
| Administering body | Verified | National Elevator Industry Educational Program (NEIEP) |
| Accreditation | Verified | ANAB's directory lists the CSPR-2 credential within NEIEP's accredited scope |
| CE020 course | Verified | Eight-hour online signaling-and-rigging foundation; prerequisite for CE021 |
| CE021 course | Verified | 20-hour classroom course developed with the Crosby Group, with hands-on rigging preparation |
| Registration support | Verified | A CE020 completion certificate may support exam registration; both courses strongly recommended |
| Exam components | Directory-corroborated | Written exam, signaling practical, and practical rigging scenarios |
| Renewal cycle | Directory-corroborated | Five years, per a secondary directory listing |
| Passing score | Unverified | Not found in retrieved sources |
| Question count and timers | Unverified | Not found in retrieved sources |
| Exam fee | Unverified | Not found in retrieved sources |
Notice the distinction between "verified" and "directory-corroborated." The five-year renewal and the exam-component description come from a secondary career-information directory, not from a current issuer handbook. They are reasonable planning assumptions, but confirm them with NEIEP before you commit to a timeline. Our CSPR-2 requirements guide covers eligibility questions in more detail.
Why the Two Course Headings Matter More Than a Number
The only content structure that can be tied directly to the issuer is a pair of preparation-course headings that NEIEP associates with both CSPR levels. These are not an official exam blueprint, they carry no published weights, and they should not be read as exhaustive coverage of everything Level 2 might test. But they are the clearest map of what the issuer expects you to learn.
Domain 1: CE020 Online Course in Signaling & Rigging
The eight-hour online foundation. It is the prerequisite for CE021 and the course whose completion certificate NEIEP says can support exam registration.
- Establishes the shared vocabulary of signaling and rigging
- Serves as the entry point before any classroom or hands-on work
- Relevant to both the written exam and the signaling practical
Domain 2: CE021 Classroom-Based Course in Rigging
The 20-hour classroom course developed with the Crosby Group, including hands-on rigging preparation.
- Builds practical rigging competence beyond the online foundation
- Most relevant to the rigging scenarios described in directory listings
- Requires CE020 completion first
Because no weights are published, you cannot responsibly say "Domain 2 is worth more than Domain 1" or compute how many questions you could miss. For a fuller look at how these headings relate to exam content, read our CSPR-2 exam domains guide.
Written Exam, Signaling Practical, and Rigging Scenarios
The directory description of CSPR-2 mentions three distinct assessment elements: a Level 2 written exam, a signaling practical, and practical rigging scenarios (the listing references both Level 1 and Level 2 scenarios). That structure has a direct bearing on how "passing" works, even though the exact scoring rules are unconfirmed.
Why a single number may not tell the whole story
When a credential includes both a written component and practical components, "the passing score" can mean different things. It might be a percentage on the written exam, a pass/fail judgment on each practical, or a combination. Without the candidate handbook, you cannot know which model applies. Do not assume a written-exam percentage is the only hurdle.
A caution about the Level 1 reference
The directory's mention of Level 1 practical rigging scenarios does not establish that you must hold a separate CSPR-1 credential first. It simply indicates the practical content spans both levels. Shared preparation courses do not make CSPR-1 and CSPR-2 interchangeable, and Level 1 rules should not be assumed to apply to Level 2.
How to Confirm the Official Score and Other Numbers
Since the verified record stops short of a passing score, the practical move is to go to the source. Here is a sensible order of operations:
- Contact NEIEP directly. Ask for the current CSPR-2 candidate handbook or equivalent document and request the scoring criteria in writing.
- Check the program website. The CSPR program site referenced by NEIEP may host a handbook; note that one candidate-handbook filename carries a 2019 date stamp, and its contents, version status, and current applicability are unverified. Do not rely on an old document without confirming it is current.
- Ask about each component separately. Request how the written exam, signaling practical, and rigging scenarios are scored and whether each must be passed independently.
- Ask about retakes and fees. Fee amounts and retake policies were not verified. Our CSPR-2 certification cost breakdown explains what is and isn't confirmed on pricing.
- Confirm scheduling. Testing windows and deadlines are covered in our CSPR-2 exam dates guide.
If you find an official passing score, treat the handbook as the authority and ignore anything that contradicts it, including this article.
Preparing When the Cut Score Is Unknown
Not knowing the threshold changes how you should prepare. Instead of aiming for a target percentage, aim for demonstrable competence across everything the two preparation courses cover. In a safety-critical field like signaling and rigging, that is also the more defensible goal: the credential exists to show you can direct a lift and rig a load correctly, not to reward partial knowledge.
Key Takeaway
Treat the course content as the full scope. Because no weights or blueprint are published, you can't safely skip any area on the assumption it is "worth less." Prepare evenly across the signaling foundation and the rigging material, and practice the hands-on skills, not just recall.
Practice questions help you test written recall, but they cannot substitute for hands-on repetition on the practical components. You can use our CSPR-2 practice tests to check written knowledge while you build physical skills separately. For a broader preparation framework, see our CSPR-2 study guide.
A Sequencing Plan Built Around CE020 and CE021
The one structural fact you can rely on is the course sequence: CE020 first, then CE021. A study plan should follow that order rather than a generic template. The timeline below is a planning suggestion, not an issuer requirement, and the week counts are illustrative.
CE020 foundation
- Complete the eight-hour online course and keep your completion certificate
- Note any signaling and rigging terms you can't yet explain in your own words
- Confirm with NEIEP whether the certificate meets registration needs
CE021 classroom and hands-on rigging
- Attend the 20-hour classroom course with the Crosby Group-developed material
- Treat the hands-on portions as practical exam rehearsal
- Photograph or write up each rigging setup you practice so you can review it later
Integration and written review
- Run through written practice questions across both course areas
- Revisit weak spots from the foundation course, since CE021 builds directly on it
- Request the official scoring and format details if you haven't yet
The reason to front-load CE020 is simple: it is the prerequisite, and the rigging skills in CE021 assume you already speak the language of the foundation course. Skipping ahead to rigging practice without that grounding invites gaps. For a quick-reference companion while you study, our CSPR-2 cheat sheet condenses the verified facts.
Avoiding Look-Alike Credentials and Borrowed Numbers
This is the section that can save you real confusion. The abbreviation "CSPR-2" is used by more than one unrelated program, and "Rigger Level II" appears in other certification systems too. This article, and this site, concern only Certified Signal Person and Rigger Level 2 through NEIEP. Specifically:
- It is not the same as the NCCCO or NCCER Rigger Level II credentials, which have their own bodies, exams, and rules.
- Its syllabus should not be assumed to match the NEIEP Mechanic Examination, which is a separate NEIEP offering.
- Level 1 examination rules should not be transplanted onto Level 2 simply because the preparation courses are shared.
- ANAB's accreditation record confirms the credential sits within NEIEP's accredited scope, but it does not establish exam topics, scoring, or individual renewal requirements.
If a source quotes a passing percentage, a question count, or a fee for "CSPR-2" without naming NEIEP, assume it may describe something else. Learn more about what the credential actually is in our guides to what CSPR-2 certification is and what CSPR-2 stands for.
Frequently Asked Questions
An official passing score was not verified in the sources checked. No candidate handbook or formal blueprint was retrieved, so the cut score, question count, and timers remain unconfirmed. Request the current scoring criteria directly from NEIEP before relying on any figure.
No. Completing a course does not itself award CSPR-2. NEIEP permits a CE020 completion certificate to support exam registration and strongly recommends both courses, but you still need to pass the credential's assessments.
No. CE020's eight hours and CE021's 20 hours are instructional hours. They are not written-exam or practical-assessment timers, which remain unverified.
A career-information directory describes a Level 2 written exam, a signaling practical, and practical rigging scenarios. This comes from a secondary source rather than a current issuer handbook, so confirm the exact format with NEIEP.
No. Other credentials share the CSPR-2 abbreviation, but their figures do not apply here. For what is known about outcomes for this credential, see our pass rate article, and confirm any scoring details with NEIEP.